COPPER SOLID BUSBARS

SPS offers a range of standard solid copper bars in the standard length of 4 m. The bars are also holed, bent or cut to length on request, and you can also find a range of different insulators and busbar supports from page 20 onwards in catalog. Hole size, number and arrangement in accordance with your specifications.

– Copper bars, flat and solid
– Standard length: 4000 mm (tolerance: –0, +200mm)
– Material: Cu-ETP F25 bare – Cu-ETP F20 and F30 on request
– Structural strength: approx. 250 N/mm²
– Electrical conductivity: 57 S x m/mm² acc. to DIN EN 13601 (DIN 46433; DIN 40500)

Type Width

(mm)

Thickness

(mm)

Cross-section

(sq.mm)

Weight/4m bar

(kg)

Copper bar SCCU 20x5x4000 20 5 100 3,56
Copper bar SCCU 30x5x4000 30 5 150 5,34
Copper bar SCCU 40x5x4000 40 5 200 7,12
Copper bar SCCU 50x5x4000 50 5 250 8,90
Copper bar SCCU 60x5x4000 60 5 300 10,68
Copper bar SCCU 80x5x4000 80 5 500 14,24
Copper bar SCCU 100x5x4000 100 5 100 17,80
Copper bar SCCU 20x10x4000 20 10 200 7,12
Copper bar SCCU 30x10x4000 30 10 300 10,68
Copper bar SCCU 40x10x4000 40 10 400 14,24
Copper bar SCCU 50x10x4000 50 10 500 17,80
Copper bar SCCU 60x10x4000 60 10 600 21,36
Copper bar SCCU 80x10x4000 80 10 800 28,48
Copper bar SCCU 100x10x4000 100 10 1000 35,60
Standards

The DIN standards DIN 43670 and DIN 43671 outline the ampacity for conductors made of aluminum and copper under various conditions in tabular form. Correction factors take account of deviating conditions. These factors are listed for:

– Conductivity-dependent load changes
– Different temperatures
– Different bar orientation and routing
– Geometry-based change for AC applications
– Height changes

DIN 43670 lists the values for aluminum busbars, and Part 2 of this standard specifies the continuous ampacity values for copper- clad busbars made of aluminum. DIN 43671 lists the corresponding values for copper busbars.

Write an e-mail. Let us know your demands. We will contact you immediately.